Tên SP: Motor giảm tốc 1/2HP – 0.4kw
Tỷ số truyền: 250 -1800
Liên hệ: 091 502 31 28 – 098 151 65 48
Mô tả sản phẩm:


Thông số kỹ thuật:
Specifications and Ratings/Chi tiết thông số kỹ thuật | ||||
Category | High Ratio Helical Speed Reducing Motor | |||
Gear Ratio | 1/250 ~ 1/1800 | |||
Mounting | Vertical Flange Mount | |||
Output Shaft (Ø) | 22mm ~ 60mm | |||
Gear Material | S45C (High-Frequency Wave), Scm21 (Carbonization) | |||
SCM4 (Nitrogen Hardening) | ||||
Motor Specification and Rating | ||||
Design Standard | IEC, CQC, JIS | |||
Pole | 4P | |||
Output Power | 0.1KW ~ 2.2KW (1/8 HP ~ 3HP) | |||
Rated Frequency | 50Hz / 60Hz | |||
Time Duty | S1 (Continuous Duty) | |||
Stator Insulation | Class B | |||
Method of Starting | Full Voltage Direct On Line or Y-Δ Starting | |||
Environmental Restriction | ||||
Place | Indoor. The product should be installed on flat and solid foundation | |||
Voltage Regulation | 10% | |||
Frequency Regulation | 5% | |||
Ambient Temperature | -5°C~40°C | |||
Attitude | Not exceed 1000 Meters | |||
Relative Humidity | Less than 85% RH (Non-Condensation) | |||
tructure | ||||
Shell Material | Aluminum Alloy (Adc356), Cast lron (Fc25) | |||
Lubrication | Grease NO.0 | |||
Bearing | Grease Pre-Packed Double-Shield Rolling Bearing. | |||
Terminal Box | Larger Size Made by Pressed Steel Which can be Set 90o Apart with | |||
Conduit Hole Cable Entrance at Left Side View from The Drive End. | ||||
Lead Terminal | Solderless Lug Teminal | |||
Painting | Phenolic Rust Proof Plus Lacquer Surface Finished Painting in Blue Color | |||
(Munsell 7.5G 4/2.) | ||||
Bolt Thread | ISO Metric System |
Đánh giá
Chưa có đánh giá nào.